| MIC-3 Marine Inspection Camera Specification |
| Standard image sensor |
1/3" Sony HAD CCD |
| High sensitivity sensor |
1/3" Sony EX-View HAD CCD |
| Effective pixels |
752 x 582 (H x V |
| Resolution |
480 TV lines |
| Minimum illumination |
0.5 Lux @ F2.0 with standard sensor
0.1 Lux @ F2.0 with EX-View sensor |
| Signal to noise ratio |
>50dB (AGC off) |
| Video output |
1.0Vp-p composite 75ohm unbalanced |
| Shutter speed |
1/50 to 1/100,000 |
| Scanning system |
50Hz, 625 lines PAL
60Hz 525 lines NTSC |
| Supply voltage/current |
8 to 15V at 130mA |
| Optics |
| Lens |
4.3mm, F2.0 (2.9 and 3.6mm options) |
| Focal length |
100mm to infinity |
| Field of view(in air/in water) |
72°/55° diagonal |
| Environmental |
| Temperature(storage/operating) |
-30 to +70° / -10 to +40°C |
| Depth rating |
300m |
| Mechanical |
| Housing material |
Acetal/brass |
| Viewport |
Acrylic |
| Weight (in air/in water) |
310g/170g |
| Size |
37 x 117mm (excluding connector) |
| Connector (right angle/in line |
Subcon LPBH-3-MP/Subcon BH3-MP |